What’s New
•
Added support to use the remote monitor as Control B to link with DJI Inspire 3 and display the pan angle of
the X9-8K Air gimbal.
•
Added support to connect the DJI LiDAR Range Finder (RS) and DJI RS Focus Motor (2022) to the DJI
Video Transmitter via the DJI LiDAR Range Finder (RS) to DJI Transmission Cable Hub. The complete system
can achieve monitoring, remote control, LiDAR waveform assistance, and lens calibration and autofocus with
a manual lens.*
•
Added function to switch autofocus and manual focus for the DJI LiDAR Range Finder in use via the AF
button of the right hand grip on the remote monitor.
•
Added support to use the remote monitor with the DJI Three-Channel Follow Focus as well as
Three-Channel Follow Focus Settings in System Menu on the remote monitor.
•
Added function to display the resolution and frame rate recorded on the upper right corner of the remote
monitor when connected to Ronin 4D or Inspire 3.
•
Added function to display the center frequency of the channels on the remote monitor.
•
Added screen color calibration for the remote monitor.
•
Added function to set the size of the waveform display and drag to change the waveform location.
•
Added function to zoom in on the image by tapping twice on the remote monitor. Enable in Exposure
Assistant/Focus Assistant Settings.
•
Added function to customize the hand grip settings on the remote monitor. Set the function of the specific
buttons and dials in General Settings in System Menu.
•
Added function to switch the unit of the focus meter on the remote monitor between Imperial and Metric.
Set in General Settings in System Menu.
•
Supported LUT effect and exposure assistant/focus assistant settings for the input image, local recording to
the microSD card, and HDMI/SDI output from the expansion plate when the input signal of the remote
monitor was HDMI.
* Make sure that all the devices have the latest firmware version when using the DJI LiDAR Range Finder (RS) to DJI
Transmission Cable Hub. Refer to the DJI LiDAR Range Finder (RS) to DJI Transmission Cable Hub Product
Information on how to update the firmware to the latest version.
Notes:
•
Attach the hand grips to the high-bright remote monitor to update firmware simultaneously.
•
Make sure to update both the video transmitter and high-bright remote monitor to the latest firmware
version when using them together. Otherwise, the video transmission may work abnormally.
•
If the update fails, restart the device and try again.