Innovative Inks &

Functional Lacquers

Screen Printing Solutions

for Laminated ID and

Credit Cards

Lamination of PVC and PETG Materials

The solvent-based ink series NoriCard and NoriCardLSI are suitable for decoration and

lamination of PVC lms at temperatures of °C (°F). If necessary, oset printability

can be improved by oset primer NoriCard078. The ink system NoriCardLSI oers

Furthermore, with NoriCure

®

CCILED we succeeded in developing an ink system,

which is perfectly matched to meet the requirements of curing via state-of-the-art

UVLED technology.

In addition to a range of basic color shades, we focus on our customers‘

requirements and are looking forward to realizing individual color shades and eects

according to your individual needs.

Screen Printing Solutions for Polycarbonate Cards

Protective Lacquers

With NoriCure

®

CSR02 a protective

lacquer with a matt nish is available

additionally.

The new UV curing -component ink system NoriCure

®

EVO oers a

complete range of color shades including highly opaque white color

shades, which enable the realization of

Signature Field Inks

All signature eld inks which are part of the solvent-based ink series NoriCardSG as

well as the UV curing ink series NoriCure

®

SF are available in dierent color shades

from colorless to highly opaque white as well as pigmented. Both inks and are

suited for printing on PVC and PC monocards and overlay lms of multilayer

cards. The printed signature elds can be signed smear-resistant with felt tip

and ballpen.

Bonding Agents / Adhesion Promoters

If a sucient peel strength in dicult applications is not

obtained, water-based bonding agent AquaPress

®

CA series are optimally tuned

to laminating temperatures between  to °C (to

°F) and furthermore odorless and have low VOC content.

Special Eects

Special Eects are outstanding eye-catcher, which can oen

be realized by screen printing only, because it is possible to

print high layer thickness and to process a broad range of

eect pigments.

Chrome-like eects can be produced by using the

solvent-based Screen Printing InkL67241.

Under the designation NoriCure

lm or overprinted with a protective lacquer such as

NoriCure

®

CSR03.

To achieve haptic surface eects on PVC and PC cards, the

use of the relief lacquer NoriCure

glossy and matt nish as well as colorless or pigmented, is

recommended.

This coating provides good ink transfer on many commercially available

substrates using thermal transfer printing.

Screen Printing Solutions for

Laminated ID and Credit Cards

The importance of plastic cards is increasing.

It is impossible to imagine the world without

plastic cards in many areas of daily life – starting

with cashless payment systems such as bank

and credit cards, vouchers, membership cards

quality and long-lasting IDcards.

To achieve your individual technical requirements and

design ideas Proell will support you with a comprehensive

range of high quality screen printing inks for printing on PVC

as well as PETG and PC substrates. We are looking forward to

nd individual solutions for your specic requirements.

High quality plastic cards are usually made up of various ink

and lm layers, where an overlay lm is applied as last layer

by means of lamination.

Our solvent-based and UV curing ink systems for lamination

appearance, it is recommended to apply an UV curing

protective lacquer onto the card surface to increase the

chemical and mechanical resistances of the lm material

and therefore extend the lifetime of plastic cards.